NOTE:
• Editing names in the phonebook is recom-
mended when the vehicle is not in motion.
• Automatic downloaded phonebook en-
tries cannot be deleted or edited.
“Phonebook Edit” can be used to add another
phone number to a name entry that already
exists in the phonebook. For example, the entry
John Doe may have a mobile and a home
number, but you can add “John Doe’s” work
number later using the “Phonebook Edit” fea-
ture.
Delete Uconnect Phonebook Entry
NOTE:
Editing phonebook entries is recommended
when the vehicle is not in motion.
To delete a Uconnect phonebook entry using
Voice Commands:
1. Push the Phone
button to begin.
2. After the “Ready” prompt and the following
beep, say “Phonebook Delete.”
3. After you enter the Phonebook Delete menu,
you will then be asked for the name of the
entry that you wish to delete. You can either
say the name of a phonebook entry that you
wish to delete, or you can say “List Names”
to hear a list of the entries in the phonebook
from which you choose. To select one of the
entries from the list, push the Voice Com-
mand
button while the Uconnect Phone is
playing the desired entry and say “Delete.”
4. After you enter the name, the Uconnect
Phone will ask you which designation you
wish to delete: home, work, mobile, other, or
all. Say the designation you wish to delete.
• Note that only the phonebook entry in the
current language is deleted.
NOTE:
Automatic downloaded phonebook entries
cannot be deleted or edited.
List All Names In The Uconnect
Phonebook
• Push the Phone button to begin.
• After the “Ready” prompt and the following
beep, say “Phonebook List Names.”
• The Uconnect Phone will play the names of
all the phonebook entries, including the
downloaded phonebook entries, if available.
• To call one of the names in the list, push the
Voice Command
button during the playing
of the desired name, and say “Call.”
NOTE:
The user can also exercise “Edit” or “Delete”
operations at this point.
• The Uconnect Phone will then prompt you as
to the number designation you wish to call.
• The selected number will be dialed.
Phone Call Features
The following features can be accessed through
the Uconnect Phone if the feature(s) are avail-
able on your mobile service plan. For example,
if your mobile service plan provides three-way
calling, this feature can be accessed through the
Uconnect Phone. Check with your mobile ser-
vice provider for the features that you have.
Answer Or Reject An Incoming Call — No
Call Currently In Progress
When you receive a call on your mobile phone,
the Uconnect Phone will interrupt the vehicle
audio system, if on, and will ask if you would like
to answer the call. Push the Phone
button to
accept the call. To reject the call, push and hold
the Phone
button until you hear a single
beep, indicating that the incoming call was re-
jected.
Answer Or Reject An Incoming Call — Call
Currently In Progress
If a call is currently in progress and you have
another incoming call, you will hear the same
network tones for call waiting that you normally
hear when using your mobile phone. Push the
Phone
button to place the current call on
hold and answer the incoming call.
NOTE:
The Uconnect Phone compatible phones in
the market today do not support rejecting an
incoming call when another call is in prog-
ress. Therefore, the user can only answer an
incoming call or ignore it.
219
To Next Page
Loading...
