Manual Lumbar — If Equipped
The lumbar adjustment handle is located on the
inboard or outboard side of the seatback. Rotate
the lever downward to increase the lumbar
support or rotate the lever upward to decrease
the lumbar support.
Driver’s Seatback Recline
To adjust the seatback, lift the lever located on
the outboard side of the seat, lean back to the
desired angle and release the lever. To return
the seatback, lift the lever, lean forward and
release the lever.
WARNING!
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against
your chest. In a collision you could slide
under the seat belt, which could result in
serious injury or death.
Fold-Flat Front Passenger Seat — If
Equipped
To fold the front passenger seat, lift the recliner
handle to the full upward position and push the
seatback forward until it rests on the seat cush-
ion.
NOTE:
You may experience deformation in the seat
cushion from the seat belt buckles if the
seats are left folded for an extended period
of time. This is normal and by simply open-
ing the seats to the open position, over time
the seat cushion will return to its normal
shape.
Outboard Lumbar Adjustment Lever
Recline Lever Fold-Flat Lever
Fold-Flat Seat
28
To Next Page
Loading...
