Manual Operation
This system offers a full complement of manual
override features, which consist of Blower Pre-
ferred Automatic, Mode Preferred Automatic, or
Blower and Mode Preferred Automatic. This
means the operator can override the blower, the
mode, or both. There is a manual blower range
for times when the AUTO setting is not desired.
The blower can be set to any fixed blower speed
by rotating the Blower Control knob (on the left).
NOTE:
Please read the Automatic Temperature Con-
trol Operation Chart that follows for details.
The operator can override the AUTO mode
setting to change airflow distribution by rotating
the Mode Control knob (on the right).
46
To Next Page
Loading...
