resettable functions, push and release the right
arrow button a second time within three seconds
of resetting the currently displayed function.
Reset ALL will be displayed during this three-
second window.
Compass/Temperature/Audio
Push and release the compass button to dis-
play one of eight compass headings to indicate
the direction the vehicle is facing, the outside
temperature, and the current radio station.
Average Fuel Economy
Shows the average fuel economy since the last
reset (pushing and holding the right arrow but-
ton as prompted in the instrument cluster dis-
play to reset). When the fuel economy is reset,
the display will read “RESET” or show dashes
for two seconds. Then, the history information
will be erased, and the averaging will continue
from the last fuel reading before the reset.
Distance To Empty (DTE)
Shows the estimated distance that can be trav-
eled with the fuel remaining in the tank. This
estimated distance is determined by a weighted
average of the instantaneous and average fuel
economy, according to the current fuel tank
level. This is not resettable.
NOTE:
Significant changes in driving style or ve-
hicle loading will greatly affect the actual
drivable distance of the vehicle, regardless
of the DTE displayed value.
When the DTE value is less than 30 miles
(48 km) estimated driving distance, the DTE
display will change to a text display of "LOW
FUEL." This display will continue until the ve-
hicle runs out of fuel. Adding a significant
amount of fuel to the vehicle will turn off the
"LOW FUEL" text and a new DTE value will be
displayed, based on the current values in the
DTE calculation and the current fuel tank level.
Tire Pressure Monitor (TPM)
Refer to “Tire Pressure Monitoring System
(TPMS)” in “Safety” for system operation.
Elapsed Time
Shows the total elapsed time of travel since the
last reset. Elapsed time will increment when the
ignition is placed in the RUN/START position.
Elapsed time is displayed as follows:
hours: minutes: seconds
Elapsed time can be reset by pushing and
holding the right arrow button (as prompted in
the display). Upon reset, all digits will change to
zeros, and time will start again if the ignition is in
the RUN or START position.
Display Units Of Measure In
To make your selection, push and release the
right arrow button until “US” or “METRIC” ap-
pears.
Personal Settings (Customer-
Programmable Features)
This allows the driver to set and recall features
when the transmission is in PARK (automatic
transmission) or the vehicle is stopped (manual
transmission).
Push and release the MENU or down arrow
button until “Personal Settings” is displayed in
the instrument cluster display then push and
release the right arrow button.
Use the right arrow button to highlight your
MENU/SUBMENU choices:
Language
When in this display, you may select different
languages for all display nomenclature, includ-
ing the trip functions. Pushing the right arrow
button while in this display selects English,
Espanol, Deutsch, Italiano, Francais, or NL de-
pending on availability. As you continue, the
displayed information will be shown in the se-
lected language.
Auto Lock Doors — If Equipped
When ON is selected, all doors lock automati-
cally when the speed of the vehicle reaches 15
MPH (24 km/h). Push and hold the right arrow
button when in this display until “ON” or “OFF”
appears to make your selection.
Auto Unlock On Exit
When ON is selected, all the vehicle’s doors will
unlock when the driver’s door is opened, if the
vehicle is stopped (manual transmission) or the
vehicle is stopped and the transmission is in the
65
To Next Page
Loading...
