CUSTOMER PROGRAMMABLE
FEATURES
Uconnect 4 With 7-inch Display and Uconnect
4/4C/4C NAV With 8.4-inch Display
Press the
Apps button, then press the Settings
button on the touchscreen to display the menu setting
screen. In this mode the Uconnect system allows you to
access programmable features.
NOTE:
•
Depending on the vehicle’s options, feature settings
may vary.
•
All settings should be changed with the ignition in
the ON/RUN position.
When making a selection, only press one button at a
time to enter the desired menu. Once in the desired
menu, press and release the preferred setting option
until a check mark appears next to the setting, showing
that setting has been selected. Once the setting is com-
plete, press the X button on the touchscreen to close
out of the settings screen. Pressing the Up or Down
Arrow button on the right side of the screen will allow
you to toggle up or down through the available settings.
Uconnect 4C/4C NAV Touchscreen And Faceplate
Buttons
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
182 MULTIMEDIA
To Next Page
Loading...
