B
AF
G
HDE
C
A. LED FOG LIGHT KIT.
(1)
Designed specifically for your vehicle
and provides an integrated look. LED Fog Lamps allow you to
upgrade your halogen fog lamps to production LED lights. For
use on Jeep
®
Gladiator models with injection molded Black
bumper or Jeep Performance Parts Off-Road Front Bumper.
Kit contains left and right fog lamps, connectors and wiring
harness. [ 82215549 – Sport, Rubicon® or Jeep Performance Parts
Off-Road Front Bumpers ]
[ 82215163 – Overland® ]
LED OFF-ROAD LIGHT KITS.
(2)(3)
These commercial LED
Off-Road Light Kits provide an exceptionally bright, fully
illuminating light source, needed for safe off-road driving.
Each light kit is pressure-washer-capable and the cast
aluminum housing ensures proper heat dissipation and
long-term durability. They are also vibration-, shock- and
EMC-tested. Kits contain two LED lights, light covers and
wiring harnesses. Wiring harness includes pigtail with ground
eyelet and blunt-cut circuit for power connection. Light Kits
work in conjunction with the Auxiliary Switch Banks.
B. 5-INCH LED OFF-ROAD LIGHT KIT. [ 82215385AB – 4,800 Lumen ]
C. 7-INCH LED OFF-ROAD LIGHT KIT. [ 82215386AB – 8,000 Lumen ]
AUXILIARY SWITCH BANK. Includes switches, Power
Distribution Centre (PDC), bracket, wiring harness, cubby
bin, tie straps and splice kit. Works in conjunction with
the LED Off-Road Light Kits. For diesel vehicles, a special
bracket is required to relocate the Auxiliary Switch Kit
PDC near the battery. [82216423AA]
D. BLACK SWITCH BANK TRIM. [ 82215190AE – Sport/Diesel ]
E. CHROME SWITCH BANK TRIM. [ 82215798AE – Rubicon/Overland ]
F. LOWER A-PILLAR LIGHT MOUNTING BRACKETS. Allow for
mounting off-road lights to body. Brackets are steel with a
Black e-coat finish, attach to existing holes on the A-pillar
cowl area, and are compatible with the Snorkel Kit.
[ 82215427AB ]
G. BUMPER-MOUNT LIGHT BRACKETS. Allow for the mounting
of off-road lights to front frames. Brackets mount to frame
rails. Compatible with all bumpers. [ 82215428 ]
H. WINCH GUARD LIGHT MOUNTING BRACKETS. Allow for
mounting of off-road lights to the Winch Guard Hoop. Kit
includes brackets for mounting round 5-inch or
7-inch lights. [ 82215729 ]
Not all part numbers shown. See retailer for additional part numbers by vehicle application.
(1)
Check local laws on installation and use.
(2)
Off-Road Lights are aftermarket only, may not be
installed by a Chrysler, Dodge, Jeep
®
, Ram or FIAT® retailer on any vehicle prior to its first retail
sale, and may not be sold or financed in conjunction with the sale of a new vehicle. FCA Canada Inc.
does not authorize the installation of these parts on any vehicle prior to its first retail sale.
(3)
Off-road lights must remain turned off, or covered, on public roadways.
To Next Page
Loading...
