MULTIMEDIA
UCONNECT SYSTEMS
For detailed information about your Uconnect 5/5 NAV
With 10.1-inch Display or Uconnect 5 NAV With 12-inch
Display system, refer to your Uconnect Radio Instruction
Manual.
NOTE:
Uconnect screen images are for illustration purposes
only and may not reflect exact software for your vehicle.
CYBERSECURITY
Depending on applicability, your vehicle may be able to
send or receive information from a wired or wireless
network. This information allows systems and features
in your vehicle to function properly.
Your vehicle may be equipped with certain security fea-
tures to reduce the risk of unauthorized and unlawful
access to vehicle systems and wireless communica-
tions. Vehicle software technology continues to evolve
over time and FCA, working with its suppliers, evaluates
and takes appropriate steps as needed. As always, if
you experience unusual behavior, contact an authorized
dealer immediately or
page 318.
The risk of unauthorized and unlawful access to your
vehicle systems may still exist, even if the most recent
version of vehicle software (such as Uconnect software)
is installed.
WARNING!
•
ONLY insert trusted media devices/components
into your vehicle. Media of unknown origin could
possibly contain malicious software, and if
installed in your vehicle, it may increase the possi-
bility for vehicle systems to be breached.
•
As always, if you experience unusual vehicle
behavior, contact an authorized dealer
immediately.
UCONNECT SETTINGS
The Uconnect system uses a combination of buttons on
the touchscreen and buttons on the faceplate located
on the center of the instrument panel. These buttons
allow you to access and change the customer program-
mable features. Many features can vary by vehicle.
Buttons on the faceplate are located below and/or
beside the Uconnect system in the center of the instru-
ment panel. In addition, there is a SCROLL/ENTER con-
trol knob located on the right side. Turn the control
knob to scroll through menus and change settings.
Push the center of the control knob one or more times
to select or change a setting.
Your Uconnect system may also have SCREEN OFF and
MUTE buttons on the faceplate.
Push the SCREEN OFF button on the faceplate to turn
off the Uconnect screen. Push the button again or tap
the screen to turn the screen on.
Press the Back Arrow button to exit out of a Menu or
certain option on the Uconnect system.
Push and hold the Power button on the radio’s face-
plate for a minimum of 15 seconds to reset the radio.
CUSTOMER PROGRAMMABLE
FEATURES
Press the Vehicle button, then press the Settings tab at
the top of the touchscreen. In this menu, the Uconnect
system allows you to access all of the available pro-
grammable features.
Uconnect 5 NAV With 12-inch Display
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
170
To Next Page
Loading...
