5. Select “Parental Controls”; from here you can turn
“Parental Controls” on or off and set up a PIN for the
controls using the Fire TV Remote.
FIRE TV REMOTE PAIRING
(USING THE REAR SCREENS)
If the Fire TV Remote needs to be paired again or a new
remote is being paired, follow these procedures:
1. Install batteries into the remote.
2. Tap the screen and Select the Gear/Settings icon on
the screen.
3. Select “Settings” on the screen.
4. In Settings, select “Controllers & Bluetooth®
Devices”.
5. From this menu, select “Add New Remote”.
6. Follow the on-screen steps for Fire TV Remote
pairing.
A long press on the Home button can also re-pair a Fire
TV Remote that has become disconnected.
NOTE:
Your vehicle is included with two Fire TV Remotes. A
Fire TV Remote can be paired to each rear screen. It will
function with the rear screen it was paired with. The
pairing steps will need to be done for each rear screen.
MEDIA SOURCES INPUT
(USING THE FRONT RADIO AND
REAR SCREENS)
Front Radio Screen
Users can select inputs for each rear screen from the
front radio touchscreen by selecting the Rear Seat tab
and choosing the desired content by selecting “Launch
Source” on the Screen 1 or Screen 2 tab.
Inputs available within Launch Source under “Inputs”
are “Fire TV”, “HDMI”, and “USB”.
Rear Screens
To select inputs on the rear screen, scroll down on the
Fire TV Home screen and select your desired input
under “Input”.
Inputs can also be selected from the Brand tab in the
top menu. While in this tab, scroll down to “Inputs” for
selection options.
NOTE:
The Brand tab naming in the top menu will depend on
the naming of the vehicle’s brand.
FIRE TV REMOTE
Fire TV Remote
MULTIMEDIA 195
5
To Next Page
Loading...
