POWER MIRRORS
The power mirror control switch is located on the driv-
er's side door trim panel.
To adjust a mirror, rotate the control switch to the
desired mirror: (L) or (R). Then push the switch in the
direction that you want the mirror to move.
NOTE:
Once adjustment is complete, rotate the knob to the
neutral position to prevent accidental movements.
Power Folding — If Equipped
To fold the door mirrors in using the Power Folding Mir-
ror function, rotate the control switch to the power fold-
ing position. Rotating the control to the left, right, or
neutral position will return the mirrors to the driving
position.
If the power mirror control switch is moved again during
door mirror folding (from closed to open position and
vice versa), the movement direction is reversed.
NOTE:
The Power Folding Mirror function is only available
when the ignition is in the ON/RUN position.
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if the
following occurs:
•
The mirrors are accidentally blocked while folding.
•
The mirrors are accidentally manually folded/
unfolded (by hand or by pushing the power folding
mirror switch).
•
The mirrors come out of the unfolded position.
•
The mirrors shake and vibrate at normal driving
speeds.
To reset the power folding mirrors: Fold and unfold
them by turning the switch (this may require multiple
switch activations to synchronize the driver and passen-
ger mirror). This resets them to their normal position.
Power mirror position can be saved as part of the Driver
Memory Settings (if equipped)
page 30.
AUTOMATIC POWER FOLDING
MIRRORS — IF EQUIPPED
When enabled within Uconnect Settings page 170,
the exterior mirrors will automatically fold when the
vehicle’s ignition is placed in the OFF position, and after
the doors are locked and closed.
The exterior mirrors will auto-fold in the following situa-
tions after the ignition is placed in the OFF position:
•
Pushing the lock button on the door panel before
the door is opened.
NOTE:
If the doors are already locked, push the lock button
again.
•
Opening the door, then pushing the lock button on
the door panel, followed by closing the door.
•
After exiting the vehicle, close the doors then push
the lock button on the key fob.
•
After exiting the vehicle, close the doors then touch
the lock icon on the Passive Entry door handle.
Automatic Unfolding
If the exterior mirrors were folded automatically, they
will unfold based on the selection with the Uconnect
system:
•
When the vehicle is unlocked using the key fob
•
When the vehicle is unlocked using a Passive Entry
door handle
•
When Proximity Wake-Up is activated page 53
•
When the ignition is placed in the ON/RUN position
NOTE:
If the mirrors were folded manually by using the power
folding mirror switch on the driver’s door panel, they will
not automatically unfold.
Power Mirror Switch
1 — Neutral Position
2—LeftMirror
3 — Control Switch
4 — Right Mirror
5 — Power Folding Position (If Equipped)
50 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
