24 GETTING TO KNOW YOUR VEHICLE
NOTE:
For each segment of lights illuminated indicating
the percent of battery charge, two different blink
rates are used. A blink rate of 1 second on/1
second off indicates that the first half is charging.
The blink rate will increase to 0.5 second on/
0.5 second off to indicate that the second half is
charging. When the battery is fully charged, the
blinking stops and the lights remain illuminated as
charging continues.
Next to the charging inlet, there is an LED that
changes color based on charging status.
Charging Inlet LED Location
HYBRID ELECTRIC PAGES
Within your Uconnect system is the Hybrid Electric
Pages App that allows you to see your vehicle’s
power flow, understand your drive history, and set
a charging schedule for your vehicle’s high voltage
battery. To access this App, press the Apps button
on the main menu bar of the radio’s touchscreen,
and locate the Hybrid Electric Pages App. Pressing
the App button brings you to a set of four pages:
Power Flow, Driving History, Charging Schedule,
and e-Save.
Apps Menu Screen
Two outer lights are
blinking
Indicates an error in the
charging process
Lights turn on one at
a time from left to
right (when looking
at the front of
the vehicle)
Indicates system is
waiting for scheduled
time in charge schedule
to begin charging
All lights turn on, then
immediately turn off
Indicates a successful
plug-in
Number Of Indicator
Lights Illuminated
Percent Of
Battery Charge
LED Charging Inlet
LED Light Color Status
Blue
Indicates that the system is
waiting for a scheduled
recharge.
Flashing Green Charging process in place.
Solid Green
Indicates the vehicle is
fully charged.
Blinking Red
Indicates a fault in the
charging system.
23_JL_H_SU_EN_USC_t.book Page 24
To Next Page
Loading...
