EasyManua.ls Logo

Jeep WRANGLER 2023 - Instrument Cluster Descriptions; Instrument Cluster Display; Instrument Cluster Display Location and Controls

Jeep WRANGLER 2023
384 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use this QR code to access your digital
experience.
INSTRUMENT CLUSTER
DESCRIPTIONS
1. Tachometer
Indicates the engine speed in revolutions per
minute (RPM x 1000).
CAUTION!
Do not operate the engine with the tachometer
pointer in the red area. Engine damage will occur.
2. Temperature Gauge
The temperature gauge shows engine coolant
temperature. Any reading within the normal
range indicates that the engine cooling system
is operating satisfactorily.
The pointer will likely indicate a higher tempera-
ture when driving in hot weather, up mountain
grades, or when towing a trailer. It should not be
allowed to exceed the upper limits of the normal
operating range.
WARNING!
A hot engine cooling system is dangerous. You or oth-
ers could be badly burned by steam or boiling cool-
ant. It is recommended to call an authorized dealer
for service if your vehicle overheats.
CAUTION!
Driving with a hot engine cooling system could dam-
age your vehicle. If the temperature gauge reads “H”
pull over and stop the vehicle. Idle the vehicle with
the air conditioner turned off until the pointer drops
back into the normal range. If the pointer remains on
the “H”, turn the engine off immediately and call an
authorized dealer for service.
3. Instrument Cluster Display
The instrument cluster display features a driver
interactive display
page 105.
4. Fuel Gauge
The pointer shows the level of fuel in the fuel
tank when the ignition switch is in the ON/RUN
position.
The fuel pump symbol points to the
side of the vehicle where the fuel
filler door is located.
5. Speedometer
Indicates vehicle speed.
INSTRUMENT CLUSTER DISPLAY
Your vehicle will be equipped with an instrument cluster
display, which offers useful information to the driver.
With the ignition in the OFF mode, opening/closing of a
door will activate the display for viewing, and display the
total miles, or kilometers, in the odometer. Your instru-
ment cluster display is designed to display important
information about your vehicle’s systems and features.
Using a driver interactive display located on the instru-
ment panel, your instrument cluster display can show
you how systems are working and give you warnings
when they aren’t. The steering wheel mounted controls
allow you to scroll through and enter the main menus
and submenus. You can access the specific information
you want and make selections and adjustments.
INSTRUMENT CLUSTER DISPLAY
LOCATION AND CONTROLS
The instrument cluster display is located in the center
of the instrument cluster.
Scan me
Instrument Cluster Display Location
1 Instrument Cluster Display Screen
2 Instrument Cluster Display Controls
GETTING TO KNOW YOUR INSTRUMENT PANEL 105
3

Table of Contents

Other manuals for Jeep WRANGLER 2023

Related product manuals