REAR WINDOW WIPER/WASHER —
IF EQUIPPED
A rotary switch on the center portion of the windshield
wiper/washer lever controls the operation of the rear
wiper/washer function.
Rotate the switch upward to the first detent
position for intermittent operation and to the
second detent for continuous rear wiper
operation.
Push the wiper lever toward the instrument
panel to activate the rear washer. The
washer pump and wiper will continue to
operate as long as the lever is held.
NOTE:
As a protective measure, the washer will stop if the
switch is held for more than 20 seconds. Once the
switch is released the washer will resume normal
operation.
If the rear wiper is operating when the ignition is placed
in the OFF position, the wiper will automatically return
to the parked position. When the vehicle is restarted,
the wiper will resume function at whichever position the
switch is set at.
CLIMATE CONTROLS
The Climate Control system allows you to regulate the
temperature, air flow, and direction of air circulating
throughout the vehicle. The controls are located on the
touchscreen and on the instrument panel below the
radio.
AUTOMATIC CLIMATE CONTROL
DESCRIPTIONS AND FUNCTIONS
MAX A/C Button
Press and release the MAX A/C button on
the touchscreen to change the current set-
ting to the coldest output of air. The MAX A/C
indicator illuminates when MAX A/C is on.
Pressing the button again will cause the MAX A/C
operation to exit.
NOTE:
The MAX A/C button is only available on the
touchscreen.
MAX A/C sets the control for maximum cooling perfor-
mance. The button illuminates when MAX A/C is on. In
MAX A/C, the blower level and mode position can be
adjusted to desired user settings. Pressing other set-
tings will cause the MAX A/C to turn off.
A/C Button
Press and release this button on the touch-
screen, or push the button on the faceplate
to change the current setting. The A/C indi-
cator illuminates when A/C is on.
The A/C button allows the operator to manually activate
or deactivate the A/C system. When the A/C system is
turned on, cool dehumidified air will flow through the
outlets into the cabin.
Recirculation Button
Press and release this button on the touch-
screen, or push the button on the faceplate,
to change the system between recirculation
mode and outside air mode. The Recircula-
tion indicator and the A/C indicator illuminate when the
Recirculation button is pressed. Recirculation can be
used when outside conditions, such as smoke, odors,
dust, or high humidity are present. Recirculation can be
Uconnect 4 With 7-inch Display Automatic Climate
Controls
Uconnect 4C/4C NAV With 8.4-inch Display Automatic
Climate Controls
GETTING TO KNOW YOUR VEHICLE 53
2
To Next Page
Loading...
