7. Release the locking tab by pushing it downward.
8. To remove the wiring harness, push the tab inward
while pulling downward to disconnect.
9. To remove the washer hose, push the release button
on hose connector, and pull downward.
10. Store the wire harness and washer hose in the
compartment below the trim. To access the stor-
age compartment, lift the trim cover as shown.
11. Secure the wire harness within the compartment
by plugging it into the receptacle and reengaging
the locking tab.
Step Seven
Step Eight
Step Eight
Step Nine
Step Ten
Step Eleven
104 GETTING TO KNOW YOUR VEHICLE
5538906_24_JL_OM_EN_USC_t_E1.pdf 104 5/22/2023 9:02:20 AM
To Next Page
Loading...
