Warning Contd.
3
6.
Check the press for loose or damaged parts
before each operation. Replace as needed be-
fore use.
7.
Some parts being pressed may have a tendency
to be ejected or explode when under pressure.
Protect yourself accordingly. Keep hands away
from the press when in use.
8. 8. Wear proper personal protective equipment
(PPE) including goggles and gloves.
Maintenance
1. Inspect the press before each use. Do not use
if crack, leaks, or other damage is found.
2.
Periodically oil moving parts, including the pump
piston and hydraulic ram.
3.
Check hydraulic connections, and hoses, before
each use. Do not use if there are cuts, leaks
or other damage.
Symptom
Possible Cause
Collecve Acon
Pump ram cannot
be moved
Pump lacks
pressure
Ram does not
retract, or does
so slowly
Moving parts
may be binding
Jack oil level low
• Reservoir overlled
• Linkage binding
Lubricate or grease
components
Add jack oil
• Drain jack to
proper uid level
• Clean and
lubricate moving
parts
Troubleshooting
To Previous Page
Loading...
Need help?
General