Jenoptik LDM51 Series User Manual

Intended use
LDM52 OEM, Release 003, Revision 000
11
3.3 Warning signs and type plates
Laser label 655 nm einfügen
The LDM52 OEM works with a class 2 laser.
When looking into the laser beam accidentally and for a
short moment, the eye will be protected by the eyelid clos-
ing reflex.
The eyelid closing reflex can be affected by pharmaceuticals,
alcohol and drugs.
This device may be used without any additional safety pre-
cautions when the following advice is observed:
 Do not look directly into the laser beam.
 Do not look at the laser beam using optical instru-
ments.
 Do not point the laser beam at other people.
Type plate
The type plate shown is an example. Type and serial number
(SN) may differ from this image.

Jenoptik LDM51 Series Specifications

General

Brand	Jenoptik
Model	LDM51 Series
Category	Measuring Instruments
Language	English