Need help?Do you have a question about the Jensen JTM-105A and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| DC Current | 200μA/2mA/20mA/200mA/10A |
| Resistance | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ |
| Battery Test | 1.5V, 9V |
| Battery Type | 9V |
| Display Digits | 3.5 digits (2000 counts) |
Explains safety symbols adjacent to terminals or devices, indicating the need to refer to operating instructions.
Lists maximum input values for voltage, current, resistance, capacitance, diode test, and continuity.
Provides essential rules for safe operation, including voltage limits and proper connection procedures.
Identifies and describes the multimeter's LCD display, buttons, and function switch.
Details the various input jacks (COM, V, mA, µA, 10A) for connecting test leads.
Explains the meaning of display annunciators and unit symbols used on the multimeter.
Provides step-by-step instructions for measuring DC voltage using the multimeter.
Details how to measure AC voltage, frequency, and duty cycle, including safety warnings.
Explains the steps for measuring DC current for various ranges (µA, mA, 10A).
Outlines the process for measuring AC current, frequency, and duty cycle.
Provides instructions for safely measuring resistance, including discharging capacitors.
Details how to perform a continuity check, including safety precautions.
Explains how to conduct a diode test and interpret the results.
Guides users on how to measure temperature using the attached probe.
Details the steps and precautions for measuring capacitance.
Explains how to measure electronic frequency and duty cycle.
Describes how to switch between autoranging and manual ranging modes for measurements.
Explains how to use the MAX/MIN function to track peak and minimum readings.
Details relative mode usage and display backlight operation.
Covers the auto power off feature and the low battery indicator.
Provides guidelines for keeping the meter dry, clean, and handling it carefully.
Lists resolution and accuracy for DC/AC voltage and current measurements.
Lists resolution and accuracy for frequency and duty cycle measurements.
Lists resolution and accuracy for resistance and capacitance measurements.
Lists resolution and accuracy for frequency, duty cycle, and temperature.
Details enclosure type, display features, input impedance, and AC response.
Lists battery type, fuses, operating/storage conditions, and altitude limits.
Outlines the warranty terms and conditions for the instrument.
Details available calibration and repair services and technical support contact.
To Next Page
