Need help?Do you have a question about the JEROS 9115 Series and is the answer not in the manual?
Outlines the manufacturer's and user's responsibilities regarding the machine's operation and maintenance.
Details the terms and conditions under which the machine's warranty is valid or lapses.
Emphasizes familiarization with safety symbols and precautions for safe operation.
Highlights potential hazards and user obligations for safe machine operation.
Explains various warning signs and symbols used throughout the manual for hazard identification.
Instructions for checking the packaging and machine for damage upon delivery.
Procedures for safely removing the machine from its packaging and pallet.
General guidelines for placing and levelling the machine on a solid foundation.
Details on connecting the machine to the hot and cold water supply lines.
Instructions for connecting the machine's drain hose to a floor drain.
Guidelines for safe electrical connection, including wiring and protection.
Information on ensuring correct motor rotation through phase sequence checks.
Specifies the intended use of the utensil washer and what it should not be used for.
Describes the operational cycle of the machine, from washing to rinsing and drying.
Daily checks and preparation steps required before operating the machine.
Procedures for loading utensils, selecting wash programs, and starting the wash cycle.
Maintenance tasks and checks to perform during the operational day.
Specific operating procedures for models equipped with automatic lid or curtain mechanisms.
Step-by-step guide for routine cleaning of the machine's components.
Procedure for safely powering down the machine and related checks.
Instructions on how to drain the wash tank.
Method for emptying the machine using the integrated flush system.
Recommended periodic checks to ensure optimal machine performance and prevent issues.
Procedure for verifying the correct functionality of the lid contact switch.
Steps for removing scale buildup from the machine's internal components.
Guide on adjusting the amount of soap dispensed for different wash programs.
Instructions on how to adjust the quantity of rinse aid used by the machine.
Lists and explains error codes (AL 01 to AL 13) with basic troubleshooting steps.
Details common causes and checks for when the machine fails to start.
Explains reasons why the machine may not stop after a wash program.
Covers problems with the machine taking in water and not taking in water.
Lists potential causes for the machine not heating correctly.
Details problems related to the rinsing function.
Addresses issues with flushing, soap, and rinse aid dispensing.
Lists causes for unsatisfactory washing outcomes.
Explains reasons for excessive foam generation in the machine.
Guidance on complying with environmental regulations for machine disposal.
Instructions for proper disposal of chemicals used with the machine.
Illustrates the electrical component layout for the 3x230V version.
Illustrates the electrical component layout for the 3x400V version.
Shows the functional flow of water, soap, and rinse aid through the machine.
Lists and illustrates spare parts for the rinsing system of the machine.
Lists and illustrates spare parts for the washing system and pump assembly.
Lists and illustrates spare parts related to the machine's drain system.
Lists and illustrates spare parts for the wash and rinse arms and nozzles.
Lists and illustrates spare parts for the water inlet and connection components.
Lists and illustrates spare parts for the machine's lid and its associated hardware.
Lists and illustrates spare parts for the front panel and control interface housing.
Lists and illustrates optional accessories available for the machine, such as tray stands.
To Next Page
General
