6
There are two filters that need to be
changed.
The outer filter can easily be
removed by disengaging the two
clips (A, Fig 5).
Fig 5
Now you can simply pull the filter out,
or carefully use a screwdriver to pop
the filter out.
There is an arrow indicating the air
flow direction on the outer filter.
Make sure the filter is inserted facing
the proper direction.
The outer filter should be replaced
depending on the amount of usage
and the environment of your shop.
The optionally availabel charcoal
outer filter can be used to reduce
certain chemical air contaminations.
The inner filter (A, Fig 6) can be
pulled out of the unit.
Fig 6
The inner filter can be blown out with
air (to be done outside of building
only!), or can be washed out.
8. Trouble shooting
Unit doesn’t start
*No electricity-
check mains and fuse.
*Defective switch, motor or cord-
consult an electrician.
*Overload fuse has reacted-
Wait and reset overload fuse.
Remote control doesn’t work
*Batteries are down-
replace AAA Batteries.
*Infrared light transmission blocked-
visual contact must be given.
*Defective remote control or sensor-
consult an electrician.
Air flow too weak
*Clogged outer filter-
Replace filter.
*Clogged inner filter-
Blow out with air or wash filter.
9. Available accessories
Stock number 708731
Electrostatic outer filter (5 Micron,
replacement filter)
Stock number 708733
Inner filter (1 Micron, washable).
Stock number 708734
Charcoal outer filter (replacement
filter, reduces certain chemical air
contaminations).
10. Environmental protection
Protect the environment.
Your appliance contains valuable
materials which can be recovered or
recycled. Please leave it at a
specialized institution.
This symbol indicates separate
collection for electrical and electronic
equipment required under the WEEE
Directive (Directive 2012/19/EC) and
is effective only within the European
Union.
To Next Page
Loading...
Need help?
General
