THE LOCK NUTS MUST BE INSTALLED ON BOTH BOLTS
TO SECURE SECTION # 4 TO SECTION # 3
Check Box When This Step is Complete
Locate the three sets of wires on the left side of Section # 3 and mate
them with the three sets of wires in Section # 4. The Two Pin Molex
connectors are for the speakers and the Three Pin Molex connector is
for the LED lights.
INSTALLATION INSTRUCTIONS
Locate the locknuts from the spare parts box and install onto the two
bolts on the right side of Section # 3.
THE LOCK NUTS MUST BE INSTALLED ON BOTH BOLTS
TO SECURE SECTION # 4 TO SECTION # 3
Check Box When This Step is Complete
Locate the locknuts from the spare parts box and install onto the two
bolts on the left side of Section # 3.
Check Box When This Step is Complete
Jennison Entertainment Technologies Ocean Pearls Service Manual Page 51
To Next Page
Loading...