Jet Ocean Pearls - Page 67

INSTALLATION INSTRUCTIONS
Step # 25
To adjust the sound - make sure the power switch on the amplifier is
turned ON and the audio cables are pluged in. These could virbate
loose during shipping.
Check Box When This Step is Complete
Step # 25-A
Turn the power switch ON and ensure the volume is turned up on the
control board.
Check Box When This Step is Complete
Step # 25-B
Rotate the knob clockwise to increase the volume, rotate the knob
counter-clockwise to decrease the volume.
Check Box When This Step is Complete
Jennison Entertainment Technologies Ocean Pearls Service Manual Page 67