Jet VBS-1408 - Safety Warnings; General Safety Precautions; Hazard Warnings and Symbols

Specifications:
VBS-1408
Stock Number .414483
Blade Speed (SFPM) 82-330
Maximum Capacity:
Height 8"
Throat 14"
Table Size 20" x 20"
Table Tilt:
Front and Back ... ... ......... ....,.... ... 8°
Left 12°
Right 15°
Welder Capacity 1/2"
Blade Length (approx.) 114"
Blade Width (max.) ... ...... ...... ... .................. ... 1/2"
Overall Height .68-1/2"
Table Height at 90° 39"
Floor Space Required 34" x 24"
Motor 1HP, 1Ph
115/230V,prewired 115V
Net Weight (approx.) 580 Ibs.
Shipping Weight (approx.) 685 Ibs.
Specifications:
VBS-1610
Stock Number .414485
Blade Speed (SFPM). .82-330 (low)
...... ... ...... ...... ...... ......... 985-3950 (high)
Maximum Capacity:
Height 10"
Throat ...15-1/2''''
Table Size 22" x 24"
Table Tilt:
Front and Back.. ... ... ...... ... ...... ...... 8°
Left ... ......... ... ...... ...... ...... ... , 12°
Right 15°
Welder Capacity 5/8"
Blade Length (approx.) ..." .." , 123-1/2"
Blade Width (max.) ... ...... ...... ...... .................. ..,.. 5/8"
Overall Height .72-1/2"
Table Height at 90° 40"
Floor Space Required 37" x 28"
Motor 2HP, 3Ph
230/460V, prewired 230V
Net Weight (approx.) 900 Ibs.
Shipping Weight (approx.) 1015 Ibs.
The specifications in this manual are given as general informationand are not binding. JET Equipment
and Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts,
fittings, and accessory equipment deemed necessaryfor any reasonwhatsoever.