Jets Charm - Function Check

Jets™ Charm Toilet
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. TO611PO
Issued 2013-10-28 Rev 3.0
5
The toilet is to be positioned with the
mounting bolts through the mounting
holes in the porcelain bowl.
6
Position the toilet bowl on the
mounting bolts.
7
When lowering the toilet bowl into
position on the bolts, ensure that the
valve outlet is securely fitted in the
outlet pipe in the wall.
8
Press the toilet firmly into the
outlet pipe to secure the
connection.
9
The bowl should be even and aligned
with the wall surface.
10
Fit the Fastening Kit, wall to
secure the toilet to the mounting
bolts.
11
Note that an M12 nut is required to
secure the toilet (not supplied in the
standard delivery). Secure the nut
firmly without over tightening.
12
Completed.
13
Function Check to be Completed Prior to Use
1. Clean the bottom of the bowl.
2. Ensure that the discharge valve has been securely connected to the
outlet pipe.
3. Check that the water supply is connected and water pressure is
adequate.
4. Turn on the water supply.
5. Press the release mechanism to activate the valve.
6. Check that the bowl fills with water.
7. Check that sufficient vacuum is created when activating the release
mechanism to release the contents of the bowl.
8. Check that the water level in the bowl is restored.
9. Check that water is dispersed on the bowl surface by the flushing
mechanism.
10. Check that there are no water or air leaks.