Jetson V8 Sport User Manual

9
HOW TO CHARGE THE BATTERY
Your Jetson V8 Sport comes with a rechargeable lithium battery. Always use the provided charger
only.BeforeyourrstrideyoumustfullychargetheJetsonV8Sport-chargefor8hours.Forevery
ride after, charge your Jetson V8 Sport until it is fully charged, and NOT LONGER. Do not leave any
chargers plugged in overnight, or leave it plugged in past the charge time.
1. Plug one end of the power cord into a grounded AC outlet and the other into the Jetson V8
Sport’s charging port. The red charging light on the charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the Jetson V8 Sport after each use.
(Pleasenote:Alwaysplugthechargerintothewallrstbeforethedevice.Ifthewalloutletdoesn’t
havepowerandyouplugthechargerintothedevicerst,itwilllightgreen,evenifthebatteryis
notfull.Soalwaysplugintothewallrsttomakesurethereispower.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE CHARGER:
Charging Light Red Battery is charging.
Charging Light Green Charging is complete.
Stop riding immediately if the Jetson V8 Sport Hoverboard displays low power.
Don’t use the battery if it emits strange odors, overheats, or begins leaking. If the battery
does leak, do not touch any leaking materials, as the battery contains dangerous
substances. Do not open the battery and do not insert anything into the battery.
Only use the provided charger for the Jetson V8 Sport. Do not charge the battery if it has
over-discharged. It should be discarded for your safety.

Jetson V8 Sport Specifications

General

Brand	Jetson
Model	V8 Sport
Category	hoverboards
Language	English