Need help?Do you have a question about the Jialing JL50QT-18 and is the answer not in the manual?
Lists detailed technical specifications and data for the scooter, including dimensions, engine, and performance metrics.
Specifies torque requirements for various fasteners used in standard and engine components, crucial for proper assembly.
Details the specific lubricants required for different engine parts and their application points.
A comprehensive guide to diagnose and resolve common starting, speed, power, and charging issues.
Outlines a routine maintenance schedule based on mileage, indicating inspections and service intervals.
Detailed steps for checking and adjusting the valve clearance for optimal engine performance.
Procedure for measuring cylinder compression pressure to diagnose engine health.
Covers essential requirements and basic materials for engine lubrication.
Instructions on how to check the engine oil level using the dipstick.
Lists common problems related to engine oil, such as loss, leakage, or low pressure.
Procedures for adjusting carburetor settings, including mixture screw and idle speed.
Detailed instructions for disconnecting and removing the engine from the scooter chassis.
Procedures for re-installing the engine onto the scooter chassis.
Key points regarding valve train lubrication and measurement procedures for wear.
Key considerations for rear wheel, brake, and shock absorber maintenance.
Specifications and service limits for rear wheel runout and brake lining.
Torque specifications for rear wheel axle, brake buffer, and silencer bolts.
Crucial safety precautions and handling guidelines for batteries and charging systems.
Specifications for battery capacity, voltage, magneto output, and rectifier.
Troubleshooting common problems related to the battery and charging system.
Information on starter motor removal, installation standards, and torque specifications.
Common problems encountered with electric scooters and their potential causes and solutions.
To Next Page
General