The remote units fit to the hot shoe atop your
camera just like a regular flash unit.
Important! Ensure the remote is attached to
your camera and switched on before setting
your camera flash controls.
Just like your flash there is an unlock
button to release the locking pin so don’t
try to remove the remote controller
without depressing the unlock button,
particularly if there are other KPS
members nearby as you don’t want to be
seen as a dill.
The Sony remote comes with a special cover to protect the somewhat delicate contacts
on the remote. Don’t lose the cover! Put it back after use!
The other units appear far more sturdy so if you use a Sony, please be especially
careful with the KPS remote. The Sony remote only works with modern Sony
bodies.
At 2019 prices it will cost you $99.00 to replace it if damaged.
For users of cameras other than Nikon, Sony, Canon and Fuji, your camera may be
compatible with either the Nikon, Canon or Fuji remotes (but not HSS). For example,
Fuji X cameras work (but not with HSS) with the Nikon and Canon remotes.
Once you have chosen a suitable remote all you need do now is get the remote to talk
with the monolights.
Page 18 of 26
To Next Page
Loading...
