Carefully pull out the edges of the soft
box so that it looks like the image at right.
IMPORTANT!
Please check that the soft box splines are
NOT showing as per our image at right
If any splines are misaligned please
carefully place them into the velcro pouch
as per our image at left.
You cannot do this once the soft box is
assembled.
The mechanism is a standard umbrella
mechanism (albeit one on steroids).
It requires a fair bit of pressure to push
the centre hub down to engage the
locking mechanism.
Be careful as it can bite.
Page 8 of 26
To Next Page
Loading...
