Need help?Do you have a question about the JINWEI AW-720WIP and is the answer not in the manual?
General| Connectivity | Wi-Fi |
|---|---|
| Lens | 3.6mm |
| Night Vision | Yes |
| Weatherproof | IP66 |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 50°C |
| Network Interface | RJ45 |
| Night Vision Distance | 20m |
| Operating Humidity | 10% to 90% |
| Supported Protocols | RTSP |
| Resolution | 720P (1280x720) |
| Viewing Angle | 90° |
Connect the IP camera and router using a network cable as illustrated in the diagram.
Download and install the JINWEI ipcviewer application on your mobile device from Google Play or App Store.
Create a new user account and log in to the JINWEI ipcviewer application using your credentials.
Add your IP camera to the app by scanning its QR code or manually inputting the UID.
Use 'admin' as the default username and '888888' as the default password for initial camera setup.
Navigate through the app menu to access and configure the camera's Wi-Fi settings.
Select your Wi-Fi network from the list and enter the correct Wi-Fi password to connect.
Visit the provided URL to download the PC client software for viewing the IP camera.
Double-click the downloaded file to install and launch the PC client application.
Enter your account credentials to log in to the IP camera viewing software on your PC.
Double-click the 'IPCam' icon within the PC client to view the live feed from your IP camera.
To Next Page