If you have any further queries please contact
our customer service team on 0121 328 7507
or email at ‘contact@jllfitness.co.uk’
IC400 MONITOR INSTRUCTIONS
If your monitor is not displaying any readings some things to check are;
1. The wires connected during assembly are securely clipped together
2. None of the metal from the wires is showing through the plastic covering
1. SET UP
2. BASICS
3. TROUBLESHOOT
When inserting the batteries
make sure they are the
correct way round
Press the down arrow
button to change the
measurements
Press the center button until
your chosen setting flashes,
to set time/distance ect
press the up or down
arrow
Press and hold the center
button to reset the digits
back to zero
To Next Page
Need help?
General
