Need help?Do you have a question about the JMA SR-4V and is the answer not in the manual?
General| Device Type | Remote Control |
|---|---|
| Brand | JMA |
| Model | SR-4V |
| Frequency | 433.92 MHz |
| Operating Temperature | -10°C to +50°C |
Details the SR remote controls' ability to incorporate multiple rolling and fixed codes.
Summarizes the duplication capabilities of the SR controls for various remote types.
Lists brands and photos for fixed and rolling code remotes that can be duplicated.
Common initial steps for copying remotes, including pressing buttons until red LED flashes.
Details steps based on the code received, differentiating between rolling and fixed codes.
Specific steps and LED indications for copying Keeloq evolutionary remotes.
Specific steps and LED indications for copying Nice Flor-R evolutionary remotes.
Specific steps for copying Evolutionary V2 remotes.
Steps for copying Aprimatic TXM evolutionary remotes, including second screen reception.
Steps for copying FAAC Master remotes, requiring multiple screens and a seed screen.
Process for copying fixed code remotes when models are not recognized as rolling codes.
Generates a compatible remote that needs registration with the installation.
Allows entering a specific serial number and pulsations for the new remote.
Creates a clone identical to the original remote.
Scans serial numbers for Mutancode and Erreka controls to find a position in the receiver.
Generates a compatible remote that must be registered with the installation.
Generates a remote identical to the original.
Generates a remote identical to the original, in fixed mode.
Step-by-step diagram for copying remotes using the SR-4V model.
Step-by-step diagram for copying remotes using the SR-48 model.
Step-by-step diagram for copying remotes using the SR-Q model.
Instructions for installing the PC application on Windows, Mac OS, and Linux.
Specific steps for installing the application on Windows operating systems.
Specific steps for installing the application on Mac OS operating systems.
Specific steps for installing the application on Linux operating systems.
Explains how to activate the USB licenses for the SR client application.
Steps to connect the SR remote to the PC application.
Guides the user through copying rolling or fixed code remotes intuitively.
Analyzes the original remote to gather information for copying.
Copies the original remote onto the SR remote by following on-screen messages.
Reads the type of code stored on SR remote buttons and allows saving.
Copies remotes with DIP-Switches, generating a compatible copy.
Creates new rolling or fixed code remotes without the original.
Reads FAAC screens to send to ALTUNA for master screen generation.
Deletes saved codes from the remote.
Allows manual entry of serial numbers and pulsations for remotes.
Generates a new serial number and compatible remote.
Produces a remote with an identical serial number to the original.
Copies rolling code remotes to operate as fixed codes.
Scans serial numbers for Mutancode and Erreka controls.
Verifies if reading and saving fixed codes were correct.
Option to save the read code for future use.
Creates new rolling or fixed code remotes based on read information.
Option for when the original remote has no switches.
Searches stored codes by various criteria like date, type, or manufacturer.
Filters and selects codes based on search criteria for generation.
Generates a text file of screens to send to ALTUNA for analysis.
Searches stored codes in the database using various criteria.
Starts the analysis of the original remote for reading its code.
Remotely or directly registers Clemsa Mutancode evolutionary remotes.
Registers JCM evolutionary remotes using three methods.
Registers Roper evolutionary remotes using direct registration.
Registers Norton evolutionary remotes using three methods.
Remotely registers Erreka remotes without touching the receiver.
Registers Nice remotes remotely or directly on the receiver.
Registers Gibidi evolutionary remotes directly on the receiver.
Registers DEA remotes in fixed or evolutionary mode.
Registers BFT remotes remotely or directly on the receiver.
Registers Pujol Vario evolutionary remotes using three methods.
Registers Celinsa evolutionary remotes remotely or directly.
Registers Doormatic evolutionary remotes remotely or directly.
Activates GO remotes directly on the receiver or programs them manually.
Registers Aprimatic TR2 evolutionary remotes.
Registers V2 evolutionary remotes using two modes.
To Next Page
