JML EZ Bed 109T User Manual

5
UsingyourEZBed
•Unplugandstorethecordinthecord
storage pocket.
•Theframewillautomaticallyextendfrom
its storage case.
•Pumpdoesnotturnoffautomatically.DO
NOTleaveonformorethanveminutes.
•WhenEZBedreachesdesired
 rmness,turnswitchtotheOffposition.
• EZBedisreadyforuse.
3.
4.
5.
•DO NOT set anything on top or around
EZ Bed during inflation.
•EZBedwillexpandtoapproximately9ftin
length and 7ft in width. Clear space
accordingly.
•Plugpumpintoapolarised230VAC
outlet.
•TurnswitchtoInateposition,EZBedwill
begin to inflate.
2.
1.
Unzipthestoragecasecompletelybefore
inflation. Make sure the panel of the storage
caseislaidatlyontheoor,thiswillprevent
damage to the bed frame and ensure the
smooth extension out of its storage case.

JML EZ Bed 109T Specifications

General

Brand	JML
Model	EZ Bed 109T
Category	Indoor Furnishing
Language	English