3
Assembling your fountain
The JM Posner Table-top Chocolate fountain is extremly simple to set
up, just follow these steps and your fountain will be ready to go in no
time at all.
• After unpacking for the rst time, wipe out the bowl with a damp
paper towel or cloth. Rinse the tier system and spiral drive in warm
water and dry.
• Slip the tier system onto the three pins in the bowl.
• Fit the spiral drive into the top of the tier system. Make sure it rmly
drops and sits in position.
• Remove battery cover on the base of the fountain, connect battery
to the fountain, put back into position and replace battery cover.
• Your fountain is now set up and ready to use.
Spiral Drive
Tier System Mains Adapter
To Next Page
Loading...
