JOCCA 2346 - Page 6

EN
6
English
- Never leave the appliance unattended during operation.
ATTENTION: the walls of the fryer may be hot during
and after use.
- Do not use the appliance in association with a
programmer, timer or other device that automatically
switches it on.
- If you are not going to use the appliance for a long
period, clean it and store it in a dry and ventilated place.
INSTRUCTIONS FOR USE
Thanks to the two resistances located at the top and bottom of the
fryer, you can cook food in less time and more e󰀨ectively, as there is
no need to turn the food as frequently.
First use
- Before using the device for the rst time, clean it with a damp cloth and
run it empty to eliminate the new smell. It is recommended to use the
device at 200º for 3-5 minutes during the rst use.
- When you connect the device to the electrical network, the display will
light up showing , and the device will emit a beep.
- Press the button, and all cooking functions, time, and temperature will
appear on the digital display. While the fryer is in operation with one of the
default programs, the selected program symbol, the fan symbol , the
clock symbol (each time the display shows the remaining time), and the
symbol will remain illuminated on the screen.
- If you need to pause the fryer during the cooking process, press the
button. It will continue to blink until pressed again, and the fryer will
resume the cooking process.
- This fryer includes a light to visualize the food throughout the cooking
process. The light activates each time a program begins its course and
turns o󰀨 when the cooking process stops or is completed.
- Now, an explanation of each function.
Preset programmes
Our fryer includes 10 preset programmes to facilitate the cooking process.