EN
8
CLEANING AND STORAGE
- Food product, before each use, as well as before the rst use, clean the
product with water and soap.
- Before proceeding with cleaning, make sure that the appliance is
disconnected from the electrical network.
- Allow the appliance to cool before proceeding with its cleaning.
- Do not use abrasive detergents or products that may damage the
appliance.
- To clean the accessories, immerse them in soapy water and let them dry.
- Not suitable for the dishwasher.
- ADD SOAP (2 ML) AND FILL THE CONTAINER* AND GRILL OF THE
FRYER WITH WATER TO LOOSEN FOOD AND GREASE RESIDUES,
TURN ON THE FRYER TO 180º AND HEAT FOR 10 MINUTES, THEN
USE A SOFT CLOTH OR PAPER TO DRY THE CONTAINER AND THE
GRILL.
- *Never add water above the screws located inside the container.
- RESISTANCE CLEANING: REMOVE THE CONTAINER AND TURN
THE FRYER, CLEAN THE RESISTANCE WHEN IT IS COOL WITH A
DAMP CLOTH.
- After cleaning, it is recommended to heat the fryer for 5 minutes to dry the
resistance and the fan, thus preventing moisture from causing oxidation of
the internal metal of the fryer.
- NEVER SUBMERGE THE APPLIANCE IN WATER OR ANY OTHER
LIQUID.
TECHNICAL DATA
220-240V ~ 50-60Hz 2100W.
This product complies with the directives: 2014/30/EU EMC,
2014/35/EU LVD, 2011/65/EU & 2015/863/EU ROHS.
PRODUCT RECYCLING – ENVIROMENT
Do not throw this product in the trash at the end of its useful life.
Take it to a waste collection point, designated for this purpose
(subject to the 2012/19/ EU WEEE directive).
English
To Next Page
Loading...
