53
• The above figures are a guideline for installation purposes. The actual dimensions of the unit
may vary slightly.
• To ensure that your unit works at peak efficiency please maintain sufficient space around your
unit as outlined on the next page.
INSTALLATION
TRANSPORTATION
• Do not carry the Side by Side horizontally or by laying it down.
• Do not carry the Side by Side by holding the door or handle; the refrigerator shall be carried by
lifting the bottom.
• This unit should never be moved alone, two people are required to safely lift or move your unit.
WHERE TO INSTALL YOUR UNIT
• The Side by Side must be placed on hard, flat ground; if cushioning is needed, stable, hard,
nonflammable cushion blocks shall be used.
• Do not use the foam packaging as cushioning blocks!
• The unit shall be kept away from damp locations where water is present. Water or dirt should be
removed from any surface of the unit as soon as possible using a soft cloth. This will help prevent
rust and will help your unit run at peak efficiency.
• Place the refrigerator in a well-ventilated place, reserve a certain space around and behind the
refrigerator, and do not cover or block the air grille on the rear cover plate of compressor at the
back of refrigerator; Keep the refrigerator away from heat source or direct sunlight.
To Next Page
Loading...
