Safety
HX,AG,SF6782 -19-05FEB99-1/1
HX,STSSA,D -19-22JUL99-1/1
OUO6075,0000AEB -19-11FEB14-1/1
Ballasting for Safe Ground Contact
Operating, steering and braking performance of combine
can be considerably affected by heavy front end
attachments which alter the center of gravity of the
combine.
To maintain the necessary ground contact, ballast the
combine at the rear end as necessary.
Observe the maximum permissible axle loads and total
weights.
H51907 —UN—10FEB99
Avoid Electrical Power Lines
Put the grain tank unloading auger in transport position
and lower the grain tank access handrail before driving
on public roads.
Secure radio aerial in its transport position before driving
on public roads, it may come into contact with low-hanging
electrical cables. This would result in the operator
suffering a severe electrical shock.
H52022 —UN—14APR99
Parking and Leaving the Machine
Lower harvesting unit to the ground.
Before leaving machine, disengage harvesting unit and
separator. Move multi-function lever to neutral position
and shut OFF machine. Apply parking brake, remove key,
and lock the operator's cab.
Never leave machine unattended as long as engine is
running.
Never leave the operator's cab when driving.
TS230 —UN—24MAY89
10-3
070717
PN=22
To Next Page
Loading...
