To Next PageTo Next Page
Need help?Do you have a question about the JohnDow Industries JDI-27DC and is the answer not in the manual?
General| Brand | JohnDow Industries |
|---|---|
| Model | JDI-27DC |
| Category | Industrial Equipment |
| Language | English |
Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related.
Lists automotive fluids compatible for recycling used oil per the US Environmental Agency (EPA).
Lists fluids that are not compatible for recycling used oil.
Attach the casters to the drain using the provided bolts and washers.
Insert the drain tube into the drain neck and secure by threading the coupler.
Attach the funnel coupler and insert the funnel into the swivel fitting, then tighten.
Thread the hose assembly into the ball valve at the bottom of the tank.
Loosen the height adjustment knob and move the drain tube to the desired height.
Ensure the lower ball valve is closed before use.
Periodically check the fluid level gauge and do not overfill the tank.
Position the drain next to the storage tank and secure the discharge hose.
Open the lower ball valve to prepare for evacuation.
Connect air supply and open air control valve to start evacuation.
