Johnson Controls Frick AcuAir - Support Structure Information










 

 

 

 



• AcuShield Roof Coating
• Joint Sealing Caulk
• Seal Gasket Tape
• 1/4" Bolts and Nuts
• Electrical Conduit Sealing Putty

To complete the installation of an AcuAir
®
system, the
following tools are required:
• Drift Pins
• 8-Foot Straight Edge
• Level
• Assorted Open-End Wrenches
• Socket Set
• Caulk Gun
• Tape Measure
• Chain Falls
• Screw Gun with Nut Drivers
• Paint Brush or Roller for Applying AcuShield Roof Coating