Use with a 2" pleated panel lter (prelter) or with a single
header (SH) rigid lter (nal Filter), either one installed in a
standard type 8 lter frame.
Use with a 4" pleated panel lter (Prelter) installed in a
standard type 8 lter frame.
Use with a 12" DH Double Headered Rigid Filter installed in a
standard type 8 lter frame.
Use with a 2" pleated panel (pre)lter in a smooth (notch free)
type 8 style lter rack.
Use with a 4" pleated panel (pre)lter in a smooth (notch free)
type 8 style lter rack.
Used to attach HEPA Filters to Holding Frame.
C70
C86
C80
HEPA Arm Filter Clip
JCI P/N - 391-008-101 Galv
JCI P/N - 391-008-100 Stainless
L
AAF 312-100-002 (L = 2”)
AAF 312-100-004 (L = 4”)
AAF 399-035-005
Use with a 12" rigid DH (nal)lter in a smooth (notch free)
type 8 style lter rack.
To Next Page
Loading...
