EasyManua.ls Logo

Johnson Controls HICM008B21S - Function Setting Details; Function Selection Item Descriptions (Continued)

Johnson Controls HICM008B21S
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SM-18003
5-29
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
(58) Automatic Reset Temperature for Heating (F6)
ThisfunctionisutilizedtosettheautomaticresettemperatureforHEAToperation.
Thesettingconditionsandtheautomaticresettemperatureforheatingareasfollows:
(59) Operation Stoppage Prevention by Wired Controller Operational Error (F7)
Thisfunctionisutilizedtopreventtheaccidentaloperationalstoppagecausedbyinadvertently
pressing(ON/OFF)onthewiredcontroller.Whenthisfunctionisvalid,theoperationisstoppedby
pressing“
”(ON/OFF)buttononthewiredcontrollerformorethan3seconds.However,theenabling
methodisnotchanged.
Operation Lock (60) to (63)
Fouroperationlockfunctionsareavailableasshownbelow.
Thesefunctionsareutilizedtorestricteachswitchoperationfromthewiredcontroller.
Whenthesefunctionsarevalid,modicationofeachfunctionisprohibited.
Alloperationlockfunctionsarevalid(“01”setting)beforeshipment.
Eachswitchoperationbecomesunavailablebypressing“
”and“Back/Help”(return)buttons
simultaneouslyformorethan3secondswhenthesefunctionsaresetas“01”.Theindication“ ” (operation
lockindicator)isindicatedonthewiredcontroller.If“ ”and“Back/Help”(return)switchesarepressed
simultaneouslyformorethan3secondsduring“ ”(operationlockindicator)isindicated,“ ” indication
isturnedOFFandeachswitchoperationisavailable.Thesefunctionsaretorestricttheoperationsof
thewiredcontrolleronly.Ifoperationispreformedfromthecentralizedcontroller,thecommandfromthe
centralizedcontrollerisgivenpriority.
(60) Lock Function for Operation Mode Selection (F8)
(61) Lock Function for Temperature Setting (F9)
(62) Lock Function for Fan Speed Selection (FA)
(63) Lock Function for Swing Louver Operation (Fb)
SettingCondition SettingTemperatureforAutomaticReset
62(17) 62
o
F (17
o
C)
64(18) 64
o
F (18
o
C)
66(19) 66
o
F (19
o
C)
68(20) 68
o
F (20
o
C)
70(21) 70
o
F (21
o
C)(Factory-Setting)
72(22) 72
o
F (22
o
C)
74(23) 74
o
F (23
o
C)
76(24) 76
o
F (24
o
C)
77(25) 77
o
F (25
o
C)
78(26) 78
o
F (26
o
C)
80(27) 80
o
F (27
o
C)
82(28) 82
o
F (28
o
C)
84(29) 84
o
F (29
o
C)
86(30) 86
o
F (30
o
C)

Table of Contents

Related product manuals