Johnson Controls HICM008B21S - Function Setting Details; Run Indicator Color (J3) and Eco-operation (J8)

SM-18003
5-31
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
(66) Not Prepared (FE)
(67) Not Prepared (FF)
(68) Not Prepared (H1)
(69) Indication of Hot Start (H2)
Whenthisfunctionissetas“NoIndication”(01),“HOT-ST”isnotindicatedonthewiredcontroller.
(70) Not Prepared (H3)
(71) Not Prepared (H4)
(72) Not Prepared (J1)
(73) Not Prepared (J2)
(74) Run Indicator Color (J3)
Thisfunctionisutilizedtosettherunindicatorcolor.
(75) Not Prepared (J4)
(76) Not Prepared (J5)
(77) Not Prepared (J6)
(78) Not Prepared (J7)
(79) Eco-operation (J8)
Thisfunctionisutilizedtoeffectivelyoptimizethesettingtemperatureandprovideenergysaving.
Whenthesettingtemperatureischangedduringtheairconditioningoperationandwhiletheoperation
isstarted/stoppedbyON/OFFbuttononthewiredcontroller,thesettemperatureautomaticallyreturns
to(57/58)“AutomaticResetTemperatureforCooling/Heating(F5/F6)”asinthefollowinggure.
However,thesettingtemperatureisnotautomaticallyresetinthecasethat“AutomaticCOOL/HEAT
Operation”mode,or“ProhibitingOperationbyWiredController”issetbythecentralizedcontroller.
SettingConditions Color
00 Green
01 Red
NOTE:
Theredrunindicatorisashingduringthealarm.
Setting
Temperature Change
Return to (57) Automatic Reset
Temperature for Cooling
STOP
Return to (58)
Automatic Reset
Temperature for Heating

Operation Mode
* COOL
* DRY
* FAN

Operation Mode
* HEAT
Setting
Temperature Change
(80) Not Prepared (J9)
(81) Not Prepared (JA)
(82) Not Prepared (Jb)
(83) Not Prepared (K1)
(84) Not Prepared (K2)
(85) Not Prepared (K3)
(86) Not Prepared (K4)