EasyManua.ls Logo

Johnson Controls HICM008B21S - Cleaning Procedure for Heat Exchanger; Heat Exchanger Cleaning Steps

Johnson Controls HICM008B21S
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
4-18
SM-18003
NOTES:
Removethedrainpanafterremovingdrainwaterinthedrainpan.
1. Removethedrainwaterinthedrainpanafterpullingouttherubberplug.
2. Inserttherubberplugintotheholeaftercheckingtheabove.
3. Removethedrainpanafterremovingfoursecuringscrews.Removethedrainpancarefully,sincethe
drainwatermayremainatthebottomofthedrainpan.
4. Cleananddrythedrainpanafterremovingit.Handlethedrainpancarefullysoasnottodamageit.
4.3.2 CleaningProcedure
Spreadavinylsheetovertheoortoprotectfurniture,etc.fromcleaningwaterbeforethiswork.
No. Procedure Tool
1
RemovetheoptionaldecorativepanelaccordingtoSection4.2.3"Removing
OptionalDecorativePanel."
PhillipsScrewdriver
2
Removetheelectricalboxafteropeningtheelectricalboxcoverand
disconnectingtheconnectorsbetweentheindoorandoutdoorunitsandother
connectorsaccordingtoSection4.2.2"RemovingElectricalBoxCover."
PhillipsScrewdriver
3
Removethebell-mouthandfanaccordingtoSection4.2.4"RemovingTurboFan
andFanMotor."
PhillipsScrewdriver
AdjustableWrench
4 RemovethedrainpanaccordingtoSection4.2.6"RemovingDrainPan." PhillipsScrewdriver
5 RemovetheoatswitchaccordingtoSection4.2.9"RemovingFloatSwitch." PhillipsScrewdriver
6
Removethedrain-upmechanismaccordingtoSection4.2.8"RemovingDrain-up
Mechanism."
PhillipsScrewdriver
TURN OFF all power source switches.

Table of Contents

Related product manuals