Johnson Controls HVAHP036B21S - Page 74

OPTIONAL PARTS
3-8
TC-16001-rev.5
Upper Side View
Left Side View
Installation Part with Outdoor Unit
Installation Part with Outdoor Unit
Securing Plate B
(Rear Side)
Wire
Securing Plate B
(Rear Side)
Wire
Wire through Holes
Screw (M6 x 2)
Securing Plate A
(Front Side)
Wire
Securing Plate A
(Front Side)
31-1/2 (800) 31-1/2 (800)
54-5/16 (1380)
* The estimated dimensions of installation with a wire angle of 60
o
.
60°±10°
Specications
Model
Item
THS-335A
Applicable Outdoor Unit Model 036 to 060
Quantity (per outdoor unit) 1
Material Stainless (SUS304)
Weight lbs (kg) 4.4 (2.0)
Installation Restriction
1. It is not possible to use the wind protection tool along with Airow Guide.
2. If the Snow Protection Hood is installed, Toppling Prevention Tool must be
used instead of Wind Prevention Tool.
3. Adjust the wire xing position to prevent interference in case of use in
combination with Wind Guard or Protection Net.
< Installation Position >