Johnson Controls LSWU - FIGURE 37 - Align Top Panels; FIGURE 38 - Align Bases; FIGURE 39 - Fan Section; FIGURE 40 - Enter the Reconnect Area

JOHNSON CONTROLS
21
SECTION 3 - LARGE CABINET FIELD REASSEMBLY
FORM 145.05-FA1
ISSUE DATE: 10/31/2019
3
COIL
SECTION
FAN
SECTION
Align Top
Panels
LD14774
FIGURE 37 - ALIGN TOP PANELS
Use pipe clamp to
align the two sections
at the base.
LD14775
FIGURE 38 - ALIGN BASES
10. Use a pipe clamp to align the two sections at
the base. In most cases, this helps align the pre-
punched holes and the nuts in the fan and coil sec-
tions of the unit (Figure 38).
11. Open the lower fan access panel in the fan section
(Figure 39), and enter the reconnect area of the
fan section (Figure 40).
Pressure
Seal Door
Lower Fan
Access
LD15135
FIGURE 39 - FAN SECTION
Reconnect area
of fan section.
LD14778
FIGURE 40 - ENTER THE RECONNECT AREA