Johnson Controls LSWU - Section 1 - Small Cabinet Field Assembly; Introduction; Parts; Small Cabinet

JOHNSON CONTROLS
7
FORM 145.05-FA1
ISSUE DATE: 10/31/2019
1
LD15016
FIGURE 1 - SMALL CABINET: MODELS 025, 032, 035, AND 040
INTRODUCTION
The L-Series water-cooled self-contained units can
be split and shipped in three segments, allowing for
ease of handling and transporting in a freight elevator
or to fit through a 36-inch doorway, for example. This
manual guides the installer in the reassembly of the
three sections based on the cabinet size. Small cabinet
instructions apply to models 025, 032, 035, and 040.
The unit is assembled and tested at the factory prior
to shipment. The sections are then separated for ship-
ment.
The three segments include:
• Compressor/condenser/coil section
• Control and supply air fan section
• Filter section
Place the sections on dollies or a hand pallet truck to
make it easier to maneuver and position the sections
for assembly. Ensure the dollies or pallet truck is posi-
tioned to support the unit by the perimeter base frame
and not the bottom pan. Failure to do so could result in
damage to the bottom of the unit.
PARTS
Table 1 on page 7 lists the parts that ship loose
with the fan compartment. Locate the box in the fan
compartment behind the pressure seal door beneath the
control compartment.
Table 2 on page 8 lists the parts that ship loose with
the filter section.
TABLE 1 - SMALL CABINET FAN COMPARTMENT
PARTS LIST
ITEM PART NUMBER DESCRIPTION QTY
1 021-30469-032
Bolt, 3/8-inch - 16 x
1-1/4 inch
10
2 021-30530-001 Screw, 10 - 16 x 3/4-inch 25
3 021-30437-006 Lock Washer, 3/8-inch 10
4 021-05167-000 Flat Washer, 3/8-inch 10
SECTION 1 - SMALL CABINET FIELD ASSEMBLY