Figure 1: NCE mounting screw hole dimensions,
(mm/in.), and mounting area requirements
4. Position the network engine and insert the screws through the holes in the mounting clips, and
carefully tighten all the screws.
Important: Do not overtighten the mounting screws. Overtightening the screws may
damage the mounting clips or NCE housing.
DIN rail mount applications
To mount the network engine on a DIN rail:
1. Securely mount a 20 cm (8 in.) or longer section of DIN rail horizontally and centered in the
required space.
2. Pull out the two mounting clips and snap them firmly. See Figure 2.
3NCE25 Installation Instructions
To Next Page
Loading...
