Operating manual - SAB 120-151 A-frame (including ATEX)
008668 en 2019.08
59/61
Compliance
10. Compliance
10.1 Declaration of conformity
Johnson Controls Denmark declares on the signed declaration of conformity that the unit is manu-
factured and CE-marked in conformity with relevant directives and standards.
The printed version of this operating manual, which is delivered with the unit, contains a trans-
lated version of the declaration, however not filled in with the specific data for your unit. The
translated version is also included in the operating manual that is available for download with the
rest of the order specific documentation.
The original signed declaration of conformity is sent separately in accordance with the ‘Guide to
application of the Machinery Directive’.
If more than one declaration of conformity is required, all relevant individual declarations will be
contained in a dossier in accordance with the EU ‘Blue Guide’. Dossiers are uploaded with the oth-
er order specific documentation.
To Next Page
Loading...
