Engineering manual - UniSAB III 1.10.8
001930 en 2021.06
277/346
UniSAB III (boot) and communication set-up
Answer yes.
Now restart UniSAB III to make the change take effect. UniSAB III is now updated to version 1.0.6.5, (in-
cluding 18 language files and configuration files) which can be seen if you enter the boot loader again.
If there is no SD (MMC) card in the card socket or no card with a valid software path on the SD card in
the socket, you will get the following error message when you press /Update.
To Next Page
Loading...
