Johnson Controls tyco KP-241 PG2 - Introduction; KP-241 Box Contents

2
KP-241 PG2 – Installation Instructions
Introduction
The KP-241 PG2 is a wireless and portable two-way keypad with a built-in proximity tag reader that is compatible with PowerMaster
systems. It enables arming and disarming of the alarm system; initiates emergency, fire, and panic alarms; and controls
programmable outputs (PGMs). The keypad provides visual indication of successful command execution and system status using
two-way communication with the control panel.
The KP-241 PG2 has the following features:
 PowerG technology
 50 to 100 meters (164 to 328 feet) indoor range
 Audible entry and exit warnings
 Three-year battery life with typical use
 Partition support
 Battery compartment and mounting bracket tampers
 Automatic low battery reports
 Keypad backlighting
 Wall-mount bracket
For more information, visit www.visonic.com.
KP-241 box contents
Before you start, verify that the box contains the following items:
 1 x keypad
 1 x mounting bracket
 1 x screw kit
 1 x CR123A battery
 3 x tags
 1 x quick start guide