SECTION 3 - OPTIVIEW CONTROL CENTER
JOHNSON CONTROLS
111
FORM 160.72-O1 (810)
MASTER SLOT NUMBERS LIST FOR USE WITH TREND FEATURETABLE 2 -
SLOT# DESCRIPTION
1296 Condenser Temperature
1379 Supply Air Pressure
1380 Compressor Balance Piston Pressure
1537 Compressor Supply Oil Temperature
1548 Compressor Shaft End Oil Return Temperature
1549 Compressor Thrust Bearing Oil Return Temperature
1556 Compressor Shaft Pump Discharge Oil Pressure
1557 Compressor Sump Oil Pressure
1558 Compressor Oil Pressure After Filter
1562 Compressor Oil Temperature After Oil Cooler
1568 Compressor Thrust Bearing Oil Pressure
1579 Compressor Oil Cooler Entering Water Temperature
1580 Compressor Oil Cooler Leaving Water Temperature
1581 Compressor Oil Cooler Water DIP
1602 Compressor Sump Oil Temperature
1792 Leaving Chilled Liquid Temperature
1807 Return Chilled Liquid Temperature
1808 Evaporator Refrigerant Pressure
1812 Evaporator Refrigerant Liquid Temperature
2007 Leaving Chilled Liquid Pressure
2008 Return Chilled Liquid Pressure
2044 Chilled Liquid Flow
2048 Return Condenser Liquid Temperature
2051 Leaving Condenser Liquid Temperature
2052 Condenser Pressure
2056 Condenser Refrigerant Temperature
2080 Return Condenser Water Pressure
2081 Leaving Condenser Water Pressure
2306 %FLA
2344 Gear Supply Oil Pressure
2345 Gear Shaft Pump Oil Pressure
2353 Gear Supply Oil Temperature
2369 Gear Oil Cooler Leaving Water Temperature
2370 Gearbox Oil Cooler Water D/P
2420 % FLkW
19481 Intercooler Refrigerant Pressure
19483 Intercooler Refrigerant Liquid Temperature
1296 Condenser Temperature (Compressor Discharge)
3
SECTION 3 - OPTIVIEW CONTROL CENTER
To Next Page
Loading...
