JOHNSON CONTROLS
91
FORM 160.72-O1 (810)
OVERVIEW
This screen displays the time alarms and trips. Each
point has either an alarm (warning) or a trip (shutdown)
or both. These points will be configured at commis-
sioning by a qualified Johnson Controls Service Tech-
nician during the manufacturing of the chiller.
DISPLAY ONLY
Chilled Liquid Low Flow
Displays the Chilled Liquid Low Flow Alarm and Trip
points, if the sensors are present and enabled.
Condenser Liquid Low Flow
Displays the Condenser Water Low Flow Alarm and
Trip points, if the sensors are present and enabled.
PROGRAMMABLE
Requires access level of SERVICE,
Service Technicians refer to the Service
Instructions (Form 160.72-M1) for opera-
tion instructions and explanation of all
programmable setpoints and displayed
values.
MISCELLANEOUS ALARMS AND TRIPS SCREEN
MISCELLANEOUS ALARMS AND TRIPS SCREENFIGURE 37 -
Set Alarms
Allows a qualified Service Technician to change any
of the alarm points shown above. Refer to the Service
Instructions (Form 160.72-M1).
Set Trips
Allows a qualified Service Technician to change any
of the trip points shown above. Refer to the Service
Instructions (Form 160.72-M1).
NAVIGATION
Home
Access Level Required: VIEW
Returns user to Home Screen.
Temperature Alarms/Trips
Access Level Required: VIEW
Moves directly to the Temperature Alarms and Trips
Screen.
Pressure Alarms/Trips
Access Level Required: VIEW
Pressure Alarms and Trips Screen.
3
To Next Page
Loading...
